Search Filter

Categories

Locations






Product Features


Clear Filters

Instrumentation

  • Sort by
  • 156 matches

Loading results...

Cable height meter - CHM600E / 300E

Dramatically reduces measuring time Inherently safe Designed for ease-of-use Hand-held portability Calibration and maintenance free operation No physical connection to cables or wires Measures the height of up to six overhead...

ORP Meter

Features ORP meter with rugged flat surface OPR electrode and high resolution of 1mV Measures ORP/Redox from -999 to 999mV Automatic electronic self calibration Simulated analog bargraph displays change in ORP reading High resolution of...

Chlorine Meter

Features Direct reading of Total Chlorine provides fast and easy measurements (less than 2 minutes) Low detection limit down to 0.01ppm Unaffected by sample color or turbidity Memory stores, tags and recalls up to 15 readings US EPA approved...

Portable Turbidity Meter

Features Large big-digit LCD and splash-proof front panel Portable design allows you to take measurement on-site instead of bringing solution back to the lab Measures up to 1000 NTU (Nephelometric Turbidity Unit) with 0.01 NTU...

Portable Dissolved Oxygen Meter

Features Measures Dissolved Oxygen concentration/saturation, pH, mV, Conductivity, TDS, Salinity, Resistivity and Temperature Automatic salinity compensation and manual barometric pressure compensation for DO measurements One button pH...

Vibration Meter with Remote Sensor

Features Remote vibration sensor with magnetic adapter on 7.9" (0.2m) coiled cable Wide frequency range of 10Hz to 1500Hz Velocity (RMS), Acceleration (Peak), and Displacement (Peak-to-Peak) measurements Automatic data hold after measurement...

Heavy Duty Vibration Meter

Ranges - Acceleration: 200m/s2, Velocity: 200mm/s, Displacement: 2mm Remote vibration sensor with magnetic adapter on 39" (1m) cable Record mode stores the maximum and minimum values for later recall Wide frequency range of 10Hz to...

4-Channel Vibration Meter/Datalogger

Features Large backlit LCD display simultaneously displays four channels Selectable data sampling rate: 5, 10, 30, 60, 120, 300, 600 seconds Remote vibration sensor with magnetic adapter on 39"(1m) cable Wide frequency range of 10Hz to...

Pen Vibration Meter

Features Measures RMS Acceleration and Velocity with metric and imperial units of measure Measurement ranges: Acceleration (RMS): 656ft/s2; 20.39g; 200m/s2 Velocity (RMS): 7.87in/s; 2.00cm/s; 200mm/s Wide frequency range of 10Hz to...

Compact Thermal Imaging System

is the world's first full-featured, pocket-sized thermal camera designed especially for building applications. Keep it on you so you're ready anytime to find and show hidden heat patterns that point out energy waste, structural defects, plumbing...

Infrared Thermometer

Dust and water-resistant: IP54 rated for dust and water resistance. Rugged: 3-meter (9.8-foot) drop tested. Ergonomically designed: Completely redesigned for a more natural hand fit. Small and lightweight; clips to your tool belt or belt loop...

Non-Contact Forehead InfraRed Thermometer

Features Measures body temperature from 89.6 to 108.5°F (32.0 to 42.5°C) without contact Accurate to 0.5°F (0.3°C) with 0.1°F/°C resolution, Fast response (0.5 seconds) Optimum measurement distance of 1.9" to 5.9" (5 to 15cm) Eliminates need...

Temperature Datalogger

Features Wide operating temperature range: -40 to 185°F (-40 to 85°C) Records up to 8000 readings Use in storage containers, shipping vans, freezers and more Logs data for days, weeks or months - up to 1 year battery life Programmable...

Wide Range Mini IR Thermometer

Features IR Temperature range: -58 to 1200°F (-50 to 650°C) High resolution of 0.1° up to 199.9° High/Low setpoints with audible alarm 0.10 to 1.00 adjustable emissivity for better accuracy on different surfaces Built-in laser pointer for...

Big Digit Indoor/Outdoor Hygro-Thermometer

Features External temperature probe: -58 to 158°F (-50 to 70°C) Internal temperature sensor: 32 to 122°F (0 to 50°C) Internal humidity range: 20% to 99% RH Max/Min with reset function Complete with built-in stand, wall mounting bracket,...

Hygro-Thermometer Humidity Alert with Dew Point

Features %RH audible and visual alarm alerts when humidity exceeds set limit Displays Dew Point temperature Max/Min with reset function Humidity: 10 to 99% Temperature: 14 to 140°F (-10 to 60°C) Basic Accuracy: ±4%RH; ±1.8°F/1°C

Penetration Stem Dial Thermometer

Features 5" (130mm) stainless steel probe with 2" (54mm) dial ON/OFF switch saves battery life Auto power off after 1 hour Temperature: -58 to 302°F (-50 to 150°C) ±2°F/1°C accuracy, 0.1°/1° resolution

Panel Mount Tachometer

Features Measure rpm from 5 to 99,990rpm with microprocessor quartz crystal accuracy of 0.05% Large LED display updates 1/sec (rpm<60) Resolution: 0.1rpm (5 to 1000rpm), 1rpm (1000 to 999rpm), 10rpm (10,000rpm to 99,990rpm) Unique design...

Digital StroboTach 220VAC, 50Hz

Features Checks and analyzes motion and speed by simply aiming and synchronizing its flash rate (fpm) with a rotating object RPMs on 4 digit LED display High accuracy over a wide, dynamic range via exclusive microcomputer LSI circuit and...

Vibration Meter + Laser/Contact Tachometer

Features Remote vibration sensor with magnetic adapter on 39"(1m) cable Wide frequency range of 10Hz to 1kHz RMS or Peak Value measurement modes Manual/Auto store/recall up to 1000 readings Data Hold and Auto shut-off Contact and...

Non Contact Photo Tachometer

Features Make non-contact rpm measurements of rotating objects Use reflective tape on object to be measured and point the integral light beam Ideal measurement range up to 6" (152mm) distance Readings updated every second Recalls...

High Precision Contact Tachometer

Features Make contact measurements of rotating objects Measure linear surface speeds in ft/min or m/min using three accessory wheels provided Recalls Last/MAX/MIN values Basic accuracy 0.05% reading Complete with cone tip, flat tip and spare...

Mini Laser Photo Tachometer

Features Make non-contact RPM measurements of rotating objects Use reflective tape on object to be measured and point the integral laser Large 5 digit LCD display with backlighting Memory button for Last/MAX/MIN readings Counter function...

Combination Contact/Laser Photo Tachometer

Features Large 5 digit backlit LCD display Microprocessor based with quartz crystal oscillator to maintain high accuracy Store/recall 10 data sets in memory with 4 parameters (measurement, max, min and average) Wide RPM (photo and contact)...

Laser Distance Meter - 100 meters

Measures up to 100 m (330 ft) Higher accuracy: +/-1 mm (0.04 in) 4-line display shows you even more data at a glance Inclination sensor assists with height tracking, leveling, and indirect horizontal distance measurements when line-of-sight is...

Optical Level

Thanks to the pendulum system with magnetic damping, the working range of the compensator comes up to ±15'. Therefore, the level ensures taking fast and precise measurements, with the standard deviation of 2 mm per 1 km double-run levelling. The...

Laser Distance Meter - 80 meters

Measure up to 80 m (260 ft) Higher accuracy: +/-1 mm (0.04 in) View more data with backlit, three-line display Full Pythagoras function for height measurements Storage of 20 complete displays for quick recall Audible keypad...

Laser Level

It is an affordable, convenient and easy-to-handle cross line laser. The device can be operated with a push of one button and features compact size and various mounting options. Its body has an eyelet for securing it directly to a wall using a...

Real Time Octave Band Analyzer

Features Meets ANSI and IEC Type 2 standards 160x160 dot matrix backlit LCD displays Leq, LE, Lmax, Lmin, and Lp Built-in memory stores up to 12,280 records in SLM mode and 1024 data points in 1/1 or 1/3 octave mode Stored data can be easily...

Noise Dosimeter/Datalogger with PC Interface

Features Perform OSHA and IEC Noise accumulation surveys Adjustable Criterion Level, Exchange Rate, and Threshold Ideal for personal/workplace accumulated noise exposure Stores 5 separate surveys including Start/Stop Time, %Dose, TWA and Peak...

Hygro-Thermo-Anemometer-Light-Sound Meter

Features Rugged 5-in-1 environmental meter with tripod mount and RS-232 PC interface Large dual LCD simultaneous display of Temperature and Air Velocity or Relative Humidity Characters on display reverse direction depending on...

Sound Level Meter with PC Interface

Features Meets ANSI & IEC 651 Type 2 standards Background noise absorber for machine noise measurements filters ambient noise 30 to 130dB measurement range with ±1.5dB accuracy Large display with backlighting and analog bargraph MIN/MAX,...

Sound Level Alert with Alarm

Features Wall, desk or tripod mount with optional 15ft (5m) microphone extension cable for remote monitoring Bright LEDs (red flashing or green) can be read from 100ft (30m) Continuous monitoring of sound level in 3 ranges: 30 to 80dB, 60 to...

Digital Sound Level Meter

Features ±2dB accuracy with 0.1dB resolution Analog AC analog output for connection to chart recorders and dataloggers Record Max/Min values over time Auto power off and MAX Hold functions Utilizes 0.5"(12.7mm) electret condenser...

Analog Sound Level Meter

Features Measurement range from 54 to 126 dB in 7 ranges Accuracy: ± 2dB @ 94dB, 1000Hz Analog output for connection to chart recorders, dataloggers, etc. Selectable weighting (‘A’ or ‘C’) and response time (Fast or Slow) Tripod mount and 9V...

Pocket Sound Level Meter

Features Pocket-sized housing with easy one button operation Large automatic backlit LCD display when meter is powered on Durable double molded side grip Tripod mount (Optional TR100 tripod) Complete with 9V battery and built-in sensor.

Imaging Moisture Meter

Featuring Infrared Guided Measurement (IGM) technology powered by a built-in FLIR Lepton® thermal imaging sensor, MR176 visually guides you to the precise spot that moisture may be hiding for further testing and investigation. Use the integrated...

Thermal Imaging Moisture Meter

Features Identify and Verify with one Tool 80 x 60 Lepton thermal imager with IGM technology Document thermal images and moisture readings on one screen Review images and generate reports with free FLIR Tools software Troubleshoot...

Wireless Temp. Humidity Logger

• High-precision, ±3% RH humidity sensor • Convenient for simultaneously recording and comparing temperature and humidity readings at 2 locations • Compact, two-channel model fits where other devices don’t • Download measurement data to a...

Pinless Moisture Meter with Bluetooth

Features Integrated Bluetooth® connects with Android devices to transmit readings for remote viewing Works with free Android App to display large, easy-to-read values for: Moisture, Humidity, Temperature, Grains Per Pound (GPP)/(g/kg), Dew...

Heat Stress Tracker

Measures: Waterproof (IP-67 standard) and floats Easy-to-read backlit display Minimum, Maximum and Average values for every measurement Data Logger (automatic and manual) stores, recalls and graphs data sets Customizable data storage...

Combination Pin/Pinless Moisture Meter

Features Choice of measuring moisture in wood and other building materials with pinless technology or use traditional remote pin probe (included) %WME (wood moisture equivalent) pin moisture reading Relative pinless moisture reading for...

Temperature Humidity Meter

Features Backlit dual display of humidity and temperature Measures dew point and wet bulb temperatures 99 record storage capacity Ergonomic design with belt clip and protective holster Quick-response capacitance sensor Compact and...

Heat Stress WBGT Meter

Features Meter accurately determines the Heat Stress level by factoring a combination of humidity, temperature, air movement, and direct solar radiation Uses a capacitance sensor to accurately measure Wet Bulb Globe Temperature (WBGT), Black...

Soil Moisture Meter

Soil moisture content measurement from 0 to 50% Easy one-hand operation Min/Max records minimum and maximum moisture readings Data hold to freeze reading on display Water resistant Complete with 4 x AAA batteries and sensor cap

Precision Psychrometer

Features Fast response time (<30 seconds) Dual backlit display Simultaneous display of: Humidity/Temperature, Humidity/Dew Point or Humidity/Wet Bulb Data Hold and Min/Max functions

Wood Moisture Meter

Features Monitor moisture in wood and other building materials Memory contains 8 wood groups with calibrations for approximately 170 species of wood Measure directly with the built-in moisture pins or use remote hand-press probe on hard...

Humidity and Temperature Datalogger

Humidity Temperature Datalogger which records up to 16,000 Humidity and 16,000 Temperature readings with a user programmable sample rate. USB interface for easy setup and data download. Dew Point indication via the included Windows-compatible...

Moisture Meter

Features Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar Audible Alert - tone rate beeps faster as the moisture level increases Icons display low, medium and high...

Hygro-Thermometer Psychrometer

Features Simultaneous display of %RH, Temperature and Dew point or Wet Bulb or Probe Temperature Wet bulb measurements without slinging Calculates T1-T2 differential (Air Temperature-External Probe Temperature) using optional probe Unique...

Mini Hygro-Thermometer Monitor

Features Measuring ranges: Temperature: 14 to 140°F Humidity: 10% to 99% RH Simultaneous display of Temperature and Humidity Built-in memory stores Min/Max readings Low battery indication Complete with built-in tilt stand and LR44 battery

Function Professional MultiMeter + InfraRed Thermometer

Features Averaging DMM with 8 functions and 0.5% basic accuracy AC/DC Voltage & Current, Resistance, IR Temperature, Diode/Continuity Built-in non-contact InfraRed Thermometer with 8:1 distance to target ratio with 0.95 fixed emissivity 20A...

Extech EX355: 11 Function True RMS Multimeter + NCV

Features True RMS for accurate AC measurements 6000 count backlit LCD display Low Impedance (LoZ) prevents false reading caused by ghost voltages Low Pass Filter (LPF) for accurate measurements of variable frequency drive signals Built-in...

Function Pen Multimeter + NCV

Features Auto/Manual ranging pen-style multimeter Large 2000 count high contrast LCD display Built-in Non-Contact Voltage (NCV) detection with visible and audible alarm Data Hold, Range Hold, Maximum Hold, Auto Power Off Overrange and low...

Mini Pocket MultiMeter with Non-Contact Voltage Detector

Features Large high contrast 4000 count LCD display Non-Contact Voltage detection identifies live circuits Built-in Flashlight Measures AC/DC Voltage, AC/DC Current and Resistance, Frequency and Duty Cycle Diode Test and Continuity...

Analog HiTester Multimeter

Features Rugged and easy to use, this meter can withstand a 1 meter drop onto a concrete floor. The 3030-10 has enhanced safety features and complies with a wide range of safety standards. It has long experience in the analog tester market, and...

Card HiTester

Features It is a card-style digital multimeter for general electrical maintenance and testing, and includes gold-plated test leads for better contact. Insulated test pin sleeves also prevent short-circuits. • Better contact test leads with 15...

Function Compact MultiMeter + NCV

Features Built-in Non-contact Voltage Detector (from 100 to 600VAC) AC/DC Voltage, DC Current, Resistance, Continuity / Diode, Battery Test Manual ranging 2000 count high-contrast LCD display 1.5V and 9V battery test function Complete...

MiniTec Digital MultiMeter

Features Large 2000 count LCD display AC/DC Voltage & Current, Resistance, Diode/Continuity 1.5V and 9V Battery test function 10A fuse protection Overload protection and indication Includes protective holster with stand, 9V battery and test...

Digital Mini MultiMeter

Features Large easy to read digital display AC/DC Voltage, DC Current, Resistance, Type K Temperature, Continuity/Diode 1.5V and 9V Battery test function Convenient mini size with protective rubber holster and tilt stand Data Hold locks...

UVA/UVC Light Meter Datalogger

Features Measures UVA (Long Wave) and UVC (short wave) light sources, plus date/time stamps and stores files onto an SD memory card in Excel format UVA probe captures long-wave 365nm UV irradiance, measurements under a UVA (black light)...

Hygro-Thermo-Anemometer-Light-Sound Meter

Features Rugged 5-in-1 environmental meter with tripod mount and RS-232 PC interface Large dual LCD simultaneous display of Temperature and Air Velocity or Relative Humidity Characters on display reverse direction depending on...

Color LED Light Meter

Features Measure White, Red, Yellow, Green, Blue, and Purple LED and Standard Lighting in Lux or Foot-Candle (Fc) units Manually store/recall up to 99 readings 4000 count LCD display Cosine and color corrected measurements Min/Max Average...

Datalogging Heavy Duty Light Meter

Features Automatically stores up to 16,000 readings or manually store/recall up to 99 readings Large backlit LCD display with 40-segment bar graph Wide range to 40,000Fc or 400,000 Lux Cosine and color corrected measurements Utilizes...

5-in-1 Environmental Meter

Features Ideal for professional or home use in testing the environmental quality in a building Ergonomic housing with large dual LCD Low friction vane wheel improves accuracy of Air Velocity and Air Flow measurements Utilizes precision photo...

Heavy Duty Light Meter with PC Interface

Features Simultaneous display of Foot Candles or Lux Super large 1.4” (1999 count) LCD display % displays differential from reference point "ZERO" Re-Calibration Utilizes precision photo diode and color correction filter Cosine and color...

Pocket Light Meter

Features Pocket-sized housing with easy one button operation Large automatic backlit LCD display when meter is powered on Durable double molded side grip Tripod mount (Optional TR100 tripod) Complete with 9V battery and built-in sensor

LED Light Meter

Features Measure white LED and Standard Lighting in Lux or Foot-Candle (Fc) units Built-in sensor with protective cover 4000 count LCD display Cosine and color corrected measurements Min/Max Average and Auto Power Off Complete with 2 AAA...

Multifunction Temperature Calibrator

• Easy to use Smartphone-like menu and interface make the operation simpler and easier Ultra-compact, size 3.9” x 7.6” x 2.0” (100mm x 192mm x 52mm), and weight 1.6 lb (0.7 kg) One hand operation • Calibrated cold junction compensation...

Documenting Process Calibrator

• Sources and measures mV, mA, ohms, RTDs, thermocouples, frequency, and pulses • Simulates and measures 13 thermocouples, 11 RTDs, and pressure to calibrate transmitters • Measures and sources pressure using CDP series Intelligent Digital...

Temperature Calibrator

Easy to read dual display lets you view input and output simultaneously Measure RTDs, thermocouples, ohms, and volts to test sensors and transmitters Source/simulate thermocouples, RTDs, volts, and ohms to calibrate transmitters Perform fast...

Precision Loop Calibrator with HART

Weight: 300g Best-in-class accuracy at 0.01% reading Small rugged design operates on (6) standard AAA batteries Intuitive user interface with Quick-Set knob for fast setup, easy use Built in selectable 250 Ω resistor for HART...

Voltage Calibrator

Features at a Glance Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015% and 1 mA resolution Measure voltage output process signals from PLCs, transmitters Source or simulate 24 mA loop current Source voltage to...

Signal Generator Calibrator

• Improve stability and reduce calibration costs. • For instrumentation systems (4 - 20 mA) and loop testing • Check temperature control equipment and electric distribution • 8 types of thermocouples to test thermoelectric power...

ProcessMeter

Weight: 369g Precision 1000V, 440 mA digital multimeter Measure ac and dc volts, ac and dc current, resistance, continuity, and frequency 0.1% dc voltage accuracy 0.05% dc current accuracy, 1 ‘A resolution to 30 mA Simultaneous mA and % of...

94dB Sound Calibrator

Features Calibrates and verifies Sound Level Meter operation Battery test position with battery status LED indicates if battery is good For use on Sound Level Meters with 0.5" or 1.0" microphones Durable die-cast, aluminum housing 1kHz...

Current Calibrator/Meter

Precision source for calibrating process devices and measuring DC process signals Oyster case with flip-up display is ideal for handheld or benchtop applications Large 3-1/2 digit LCD display and touch keypad Display readings in mA or as a %...

Current and Voltage Calibrator/Meter

Precision source for calibrating process devices and measuring DC process signals Oyster case with flip-up display is ideal for handheld or benchtop applications Large 3-1/2 digit LCD display and touch keypad Display readings in mA or as a %...

Calibration Source Checker

Weight: 283.5g Easy to use pocket checker for simulating Current Loops Pocket Checkers are easy to use and provide a quick and easy way for checking calibration of meters or controllers Instantly determine if your device needs calibration or...

700bar Hydraulic Pressure Pump

Weight: 1.36 kg Wide Pressure Range 0 - 10,000 psi (700 Bar) Compatible with most hydraulic fluids, oils and water Connections (2 ports) 1/4 inch NPT/BSP

Pneumatic High Pressure Test Pump

Weight: 6.5kg The High Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 3,000psi (200bar). With a long lever, it just takes 40 seconds to reach 3,000 psi (200 bar). A high-quality screw press...

40bar Pneumatic Pressure Test Pump

Pneumatic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from -14psi (-0.95bar) to 600psi (40bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 10 Pa...

Automated Handheld Pressure Calibrator

Weight: 1.8 kg Features A portable automated pressure calibrator in the palm of your hand—this could be our most exciting product yet! Automatic Handheld Pressure Calibrator takes portable pressure calibration to new levels. Weighing less than...

Hydraulic Pressure Calibration Pump

Hydraulic Pressure Test Pump is a benchtop pressure pump designed to generate pressure to 40,000 psi (2,800 bar). This pump incorporates a dual-piston system which is ideal for filling larg volume workload with the hand pump and providing smooth...

Pressure Controller

Weight: 15 kg For years, we’ve provided the most durable, accurate, quality pressure calibration products for field applications. This controller incorporates the same durability, accuracy, and quality into a new bench top controller packed...

Automated Pressure Calibrator

Weight: 5.6 kg • Pressure Range Pressure generated by built-in pump and controlled automatically from -13 psi vacuum to 375 psi (25 bar) Pressure measured with external pressure modules (ADT160 series) to 10,000 psi (700 bar) • Accuracy...

Digital Ultrasonic Thickness Gauge / Datalogger

Features Wide measurement range: 5MHz probe: 0.040" to 20" of steel 10MHz probe: 0.020” to 20" of steel (optional) Color LCD display with red, yellow and green visual alarm indication 100K internal datalogger with export to Excel Echo to...

Ultrasonic Flaw Detector

Ultrasonic flaw detector is designed for nondestructive testing of metals, plastics, glass, composite materials, weld inspection and measurement thickness of the various products and structures. Flaw detector allows user to detect various...

Combined Hardness Tester

The device operates with both UCI (Ultrasonic Contact Impedance) and Leeb (dynamic) probes. User get the benefits of two methods of measurement – it is the maximum that can be obtained from portable hardness tester.

UCI Portable Hardness Tester

Features UCI hardness tester is designed for rapid non-destructive hardness testing of: metals and alloys on standardized international scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); metals with distinctions in properties of...

High Capacity Force Gauge with PC Interface

Features Ranges: 0.05 to 100kg; 0.05 to 220lbs; 0.2 to 980 Newton Basic accuracy 0.5% Tension or Compression, Peak hold and Zero functions Positive/Reverse display for easy easy readability Large LCD with backlight feature RS-232 PC...

Ultrasonic Thickness Gauge

It is a hand held microprocessor controlled ultrasonic thickness gauge specifically designed for measuring the thickness of metallic and non-metallic materials such as aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic...

High Capacity Force Gauge

Weight: 551g Features Range: 44 lbs, 20kg, 196 Newtons (±0.5% accuracy) Ideal for a wide variety of applications in the electronics, automotive, chemical, plastics and machinery industries Reversible display and fast/slow response...

Digital Force Gauge

Weight: 551g Features Range: 176 oz, 5000g, 49 Newtons (±0.4% accuracy) Ideal for a wide variety of applications in the electronics, automotive, chemical, plastics and machinery industries Reversible display and fast/slow response...

COUPLER

Weight (Kg) 0.40 Dimension (LxWxH) mm 205x45x25

Autoclave

Operating Temp. Range Sterilizing: 105°C - 135°C (0.019 MPa – 0.212MPa) Heating: 45°C - 104°C (0Mpa – 0.015 MPa) Warming : 45°C-95°C

Microscope

Double layer specimen stage (243 x 158 mm) with exchangeable, ultra-hardened, flexible glass plate and right handed mechanical stage, moving range 77 x 55 mm. ERGO head with variable inclination from 5° to 35°

Double Beam Spectrophotometer

Wavelength range 190 to 900 nm Spectral bandpass 0.1, 0.5, 1, 2, 4, 5 nm (6 steps) Wavelength accuracy ±0.1 nm (at 656.1 nm after wavelength calibration)

Atomic Absorption Spectrophotometer

Optical system- Single beam, 1800 lines/mm grating Wavelength range- 190 – 900 nm Wavelength accuracy- ± 0.45 nm or Less Wavelength reproducibility- 0.2 nm or Less Instrument resolution- Better than 0.3nm Light source- 6-lamp turret, 2 lamps...

Industrial Barcode Readers

Our products helps manufacturers to reduce cost, automate critical manufacturing processes, and increase yields through data acquisition and control solutions. Product technology ranges from basic barcode reading, barcode verification through...

AUTO CLAVE

Temperature Range 121 °C to 125 °C Pressure Range 15 PSI Control System Controls pressure and temperature along with built in adjustable digital timer sterilization cycle time with auto cut off.

Video Borescopes

Features : Diameters: 6 or 8,10 mm Lengths: 1.5 to 7.5 Meter Length Available (5 to 24.6 ft.) Without Articulation / With Articulation : 4-Way High Resolution CCD Image High Definition VGA LCD Display Built-in Video Recording & Digital...

Quick Release Couplings

Flat face (flat face) high pressure couplings are particularly suitable for safety-related compounds in which there should be no leakage of the medium. The couplings that provide increased security in the coupled state, including the Screwed...

Threaded Fittings

The threaded fittings and pipe fittings offer the possibility to choose the correct fitting depending on the application. Pressures from 25 to 250 bar allow the fittings a wide range of applications. The threaded fittings are divided into the...

Push-In/On Connectors

For Push-in fittings the hose is simply pushed to the limit, a special retaining ring secures the hose reliably and tight without further aids. By pressing the release ring and simultaneously pulling the hose connection is released. Easy, safe...

Tubes

In this category you will find seamless stainless steel tubes, welded stainless steel pipes, seamless stainless steel Capillary tube and welded stainless steel Capillary tube DVGW. Assigned variants of stainless steel pipes can also be found...

Compression Fittings

Screw is not the same screw! This phrase is especially true for Stainless Steel Pipe Fittings, which depend on the highest security and with little downtime. The heart of a cutting ring fitting according to EN ISO 8434-1 (DIN 2353) is the...

VC-Couplings

Schwer Fittings offers the category "VC-connectors" high quality precision connections with metal sealing washer for a variety of high-tech applications. Typical applications are in the laboratory, analysis, high-purity, semiconductor, general...

Orbital Welding Fittings

The ideally use for orbital welding fittings is in tight spaces, where low weight and highest purity are required. They are available in long or short version, with or without collar. The weld ends are exactly plane rotated, guarantee exact...

Cavity Free Ecotube Couplings

The patented Ecotube fittings of Schwer Fittings fit in the category of gap and cavity-free fittings. Mainly used where piggable and smooth transitions be required in the pipe interior. The sealing elements are (Round) chambered and outside...

Electromagnetic Flow meter

Flange Material UNI 2223 in Carbon Steel; AISI316 Electrodes Hastelloy C Coating: Ebonit or PTFE Diameter: from DN15 to DN2000 mm Pressure: from PN10 to PN64 mm Fluid Conductivity >5μS/cm

Probe

pH/Redox Conductivity Inductivity Chlorine Oxygen Turbidity Peroxide Peracetic Ozone

Photometer System

Multi parameter with High accuracy measure and integrated Data logger. Also with RS485 port with ModBus RTU protocol for full compatibility remote data logging interface pH/ORP Chlorine Photometric chamber DPD method Temperature

Kontrol 40

Single parameter pH/ORP Conductivity Flowrate Chlorine Amperometric and Potentiostatic Cell

Kontrol 800

Parameter: pH/ORP Conductivity Chlorine Amperometric Cell Chlorine and Chlo. Dioxide Potentiostatic Cell

Kontrol 500

Single parameter pH/ORP Conductivity/Inductive Dissolved Oxygen Chlorine and Chlo. Dioxide Potentiostatic Cell Hydrogen Peroxide Ozone (03) Peracetic Turbidity Suspended Temperature

Internal Check Valve

Internal Check Valve

Sealent Injection Fitting

BHOLA ENGINEERS® offers the INLOK brand Valve Lubrication / Sealant Injection Fittings, Couplers, Adaptors & Tools which either comes in Carbon Steel, Stainless Steel or any other type of Exotic material. Stainless Steel or Exotic material is...

Manifold Valves

BHOLA ENGINEERS® INLOK BRAND Instrumentation Manifolds Valves in bar stock & forged are specially designed for operation with most of the Fluids up to 10000 psig and on special request up to 30,000psig ratings. These valves are complete with PTFE...

Needle Valves

BHOLA ENGINEERS® INLOK BRAND Needle Valves IN bar stock & forged are specially designed for operation with most of the Fluids up to 10000 psig and on special request up to 30,000psig ratings. These valves are complete with PTFE gland packing or...

Instrument Ball Valves

BHOLA ENGINEERS® INLOK BRAND Ball Valves IN bar stock & forged are specially designed for operation with most of the Fluids up to 10000 psig and on special request up to 30,000psig ratings. These valves are complete with PTFE gland packing or...

Double Compression Tube Fittings

Bhola Engineers INLOK® Double Ferrule compression fittings have been developed to complete the compression fittings range

Tubes

SS316/SS316L, SS904

TEST BENCHES

CONSTRUCTION OF TEST BENCH Work table Manufactured with 40mm Square Mild Steel Square tube with suitable bench top made up of 25mm thick chip Board. Under bench cabinet Storage space with lockable drawers for keeping necessary stationary...

SIGNAL CALIBRATORS

PRODUCT OVERVIEW USC Signal Calibrators Ideal for calibrating thermocouples, RTD, indicators, controllers,transmitters, receivers and mA, mV, V, ohms measuring instruments mV / mA Loop Calibrator Ideal for calibrating indicators, controllers,...

CONSTANT TEMPERATURE LIQUID BATH

PRODUCT OVERVIEW Ideal for calibration or testing of thermometers, temperature sensors, temperature gauges, etc. PRODUCT FEATURES LED Display Micro processor based digital PID Temperature Controller Setting through feather touch key...

DRY BLOCK TEMPERATURE CALIBRATOR

PRODUCT OVERVIEW Ideal for calibration of thermocouples, RTD, gauges, thermometers, switches, transmitters etc. PRODUCT FEATURES Dry Block Micro processor based digital Fast Heating & Cooling Available in 2 ranges & 6 models Controlled...

COMPARATOR PUMPS

PRODUCT OVERVIEW To be used along with analog or digital, standard or master pressure gauges or indicator for checking and calibration of oil operated sensors, manometers, gauges, indicators, controllers, transducers, transmitters, recorders and...

CALIBRATOR PUMPS

PRODUCT OVERVIEW To be used along with analog or digital, standard or master, vacuum or pressure,gauges or indicator for checking and calibration of oil operated sensors, manometers,gauges, indicators, controllers, transducers, transmitters,...

PRESSURE COMPARATOR KIT

PRODUCT OVERVIEW Checking and calibration of oil operated sensors, gauges,indicators, controllers, transducers, transmitters, recorders and data loggers PRODUCT FEATURES INDICATOR: Loop power supply with mA measurement for transmitter...

PRESSURE CALIBRATOR KIT

PRODUCT OVERVIEW Ideal for calibration of vacuum & pressure gauges, switches, transmitters, etc. PRODUCT FEATURES MEASUREMENTS: Loop powered supply with mA measurement for Transmitter calibration. Electrical measurements of mA & Volts . Peak...

DIGITAL MANOMETER

PRODUCT OVERVIEW Ideal for calibration of differential pressure transmitters,differential pressure gauge, level transmitters, flow transmitters, magnahelic gauge, etc. PRODUCT FEATURES MEASUREMENTS: Electrical measurements of mA & Volts Peak...

DIGITAL PRESSURE GAUGES

PRODUCT OVERVIEW Ideal for calibration of Pressure Gauges, Vacuum Gauges, etc. PRODUCT FEATURES Micro Controller based Large backlight alpha numeric display Feather Touch keypad for easy operation ‘Auto OFF’ function for longer battery...

PRESSURE CALIBRATORS

PRODUCT OVERVIEW Ideal for calibration of vacuum & pressure gauges, switches, transmitters, etc. PRODUCT FEATURES MEASUREMENTS: Loop powered supply with mA measurement for Transmitter calibration . Electrical measurements of mA & Volts . Peak...

FIRE FIGHTING and FIRE DETECTION & ALARM SYSTEM

1. FIRE FIGHTING SYSTEM • HYDRANT SYSTEM • SPRINKLER SYSTEM • WATER SPRAY SYSTEM • CO2 GAS FLOODING SYSTEMS • ECO FRIENDLY GAS BASED SYSTEM • FOAM BASED FIRE FIGHTING SYSTEM • WATER MIST SYSTEM • TRANSFORMER FIRE PROTECTION SYSTEM 2.FIRE...

Double Block & Bleed Valve / Hy-Lok Corporation

We can provide DBB Valve suitable for Instrument & Piping Solutions Our DBB's are certified to API6A, API6D, API6DSS Our strength is from 1/2" to 4" with all material grade & as per End User specification

Double Block & Bleed Valve / Hy-Lok Corporation

We can provide DBB Valve suitable for Instrument & Piping Solutions Our DBB's are certified to API6A, API6D, API6DSS Our strength is from 1/2" to 4" with all material grade & as per End User specification

Double Block & Bleed Valve / Hy-Lok Corporation

We can provide DBB Valve suitable for Instrument & Piping Solutions Our DBB's are certified to API6A, API6D, API6DSS Our strength is from 1/2" to 4" with all material grade & as per End User specification

Manifold / Hy-Lok Corporation

Instrument Manifold needed for Pressure Gauge , Transmitter & Differential Pressure Transmitter Our Manifold's is been used, proved & recommended by YOKOGAWA, Emerson etc etc

Instrument Valve / Hy-Lok Corporation

We can provide small bore instrument valves Ball Valve, Needle Valve, Check Valve, Relief Valve Pressure rating upto 10,000 Psig

Tube Fittings / Hy-Lok Corporation

Tube Fittings ( Double Compression Fittings ) Size: 1/16" to 2 " Material : SS316, 6MO , Alloy 825, Alloy 625, Duplex, Super Duplex, Monel, Hastelloy etc etc ( we have provide material with various grade depending upon end user specification...

Shore A Durometer

Features Designed to test the hardness of Rubbers and Plastics These sleek hand held hardness testers are crafted and engineered to perform at the highest level of accuracy. An ergonomic lightweight design assists in taking precise and...

Multi-Thermocouple Calibrator

Features Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N) CJC - Cold Junction Compensation function Up to five user adjustable calibration presets Palm-sized double molded housing and large dot-matrix digital backlit...

Loop Calibrator

Weight: 350g

Hygro-Thermo-Anemometer-Light Meter

Features Ergonomic pocket size housing with large dual LCD simultaneous display of Temperature and Air Velocity or Relative Humidity Characters on display reverse direction depending on Hygro-Thermo-Anemometer or Light Mode Data Hold to freeze...

Laser Distance Meter - 30 meters

Distance Meter has the original elongated shape, what makes it unique among other manufacturers models. Another advantage of this meter is simplicity and comfort of using, thanks to 2 function buttons only. Keeping the basic functions, managed to...

Laser Distance Meter - 40 meters

The working range is 0.05 to 40 m. It provides an extended range of functions, such as addition and subtraction, as well as area and volume calculation, Pythagoras, Min/Max mode, and distance tracking. It is a precise, fast and reliable device...

Compact Temperature Indicator

Features Includes 0.78" (20mm) stainless steel probe with 9.6ft (2.9m) cable Measures temperature from -40°F to 158°F (-40°C to 70°C) ±1.8°F/1°C basic accuracy with 0.1° max resolution Audible and visual alarm alerts when temperature level is...