Search Filter

Categories

Locations






Product Features


Clear Filters

Gaskets, Seals & sealing systems

  • Sort by
  • 23 matches

Loading results...

Gaskets

Manufacturer and supplier of gasket.

Gaskets

These are available in the following grades: Standard: ASME B16.20, API Type: Spiral Wound, Compressed Non Asbestos Fibre (CNAF) and Ring Joint. Size Range : ½” to 36” from 150 to 2500 Class

Gasket

Specification And Grades (Carbon Steel and Stainless Steel) • Spiral wound Gasket • Metal Ring Gaskets • Asbestos fres Soft Cut Gaskets as per ASME/ANSI/API Flange requirements Gaskets to other standards, materials can be supplied from...

SPIRAL WOUND GASKET

Ex-R type (Only Gasket) Excellent Gasket provides this type as only the Gasket. A winding with an alternate combination of a STEEL strips and a soft non-metallic FILLER. The metal strip in the gasket is performs superior resiliency and...

GROOVED METAL WITH SOFT LAYER SHEATHED GASKET

Type WGR Kammprofile gasket of this type is manufactured without a guide ring it is comprised of a core metal of any specification as required with concentric grooves on both sides that covered with Graphite or Expanded PTFE. It is typically...

DOUBLE JACKETED GASKET

Excellent Double Jacketed gaskets used for heat exchangers and large vessels. The Double Jacketed Gaskets consists of jacketed metal encapsulate with soft filler. The Double jacketed Gaskets are designed as per ASME B16.20. Double Jacketed...

COMPRESSED NON-ASBESTOS (CNAF) GASKET

Excellent Gasket provides Asbestos free (CNAF) cut Gaskets for serrated finish flanges for all pressure rating. Excellent Gasket normally manufactures Ring Type (Inside Bolt Circle), Full Face (Entire Face of Flange with bolt holes) and Tailor...

RUBBER GASKET

Excellent Gasket manufactures Rubber cut Gaskets, Ring Type (Inside Bolt Circle), Full Face (Entire Face of Flange with bolt holes) and Tailor made (As per Drawing). These gaskets manufactured to ASME B16.21, designed to suit ASME B16.5 and ASME...

GRAPHITE GASKET

Excellent Gasket manufactures Graphite, Ring Type (Inside Bolt Circle), Full Face (Entire Face of Flange with bolt holes) and Tailor made (As per Drawing). These gaskets manufactured to ASME B16.21, designed to suit ASME B16.5 and ASME B16.47...

EXPANDED PTFE GASKET

Excellent Gasket manufactures Expanded PTFE, Ring Type (Inside Bolt Circle),Full Face(Entire Face of Flange with bolt holes) and Tailor made (As per Drawing). These gaskets manufactured to ASME B16.21, designed to suit ASME B16.5 and ASME B16.47...

PTFE GASKET

Excellent Gasket manufactures PTFE, Ring Type (Inside Bolt Circle), Full Face (Entire Face of Flange with bolt holes) and Tailor made (As per Drawing). These gaskets manufactured to ASME B16.21, designed to suit ASME B16.5 and ASME B16.47...

INSULATION GASKET AND KITS

Excellent Gasket manufactures insulation Gaskets and it is full kit for entire flange. Full gasket kit set consists of One insulating gasket, One full length sleeve per bolt, Two insulation washer per bolt, Two steel washer per bolt. This Gasket...

Maxigraph Corrugated Gasket

Excellent gasket manufactures this type gaskets; consist of corrugated steel with soft layer laminated on top and bottom face of corrugation faces. Steel provide sufficient strength and soft layer provides sufficient seal between flanges. These...

METALLIC GASKET (Lens Gasket)

A lens type gasket is a line contact seal for use in high pressure piping systems and in pressure vessel heads. The lens cross section is a spherical gasket surface and requires special machining on the flanges. These gaskets will seat with a...

METALLIC GASKET (Grooved Metal Gasket)

Concentric 'v' grooves on the flat metal. Pitch of the groove normally 1 to 1.5mm, groove depth will be 0.4 to 0.7mm. These gasket required top of the 'v' groove 0.1 to 0.2mm flat will give required to seal. Grooved metal gaskets are sealing...

METALLIC GASKET (Ring Type Joint Gasket)

Ring type joint gasket (usually steel) used in pressure testing to minimize damage to flanges. The rubber contact points provide additional seals while protecting the flange surfaces.

METALLIC GASKET (Bx Type Ring Joint Gasket)

The bx ring gasket differs from the standard rx, oval or octagonal shape since it is square in cross section and tapers in each corner. Bx is used at pressures up to 20,000 psi. The bx gaskets will have pressure relief hole at mid portion of c....

METALLIC GASKET

Ring type joint gaskets: Ring type joint gaskets comprises of two types such as oval cross section and an octagonal cross section. These types of gaskets are used in pressures up to 10,000 psi. The dimensions are standardized and require...

SS Washers, Duplex Steel Plain Washer, Serrated Star Washer, Tab Washer

Chamunda Industries are one of the renowned manufacturer, exporter, stockist, stock holder and supplier of a qualitative range of Washers Fastener that are being designed as per the national and international standard quality of raw materials. A...

Seals for aircraft engines

These seals can be outer air seals, interstage seals, or have a different sealing function in the engine. We can supply these seals as an individual segment, a complete ring, or as part of a more complex component.